Reverse engineer your way to the target
You want to reverse engineer your way to the target. You need a KPI number set for each data point, so you can work out exactly how many dials the department must make every single month.
KPI 1: Pickup rate
Speed to lead, marketing quality, and whether your team calls across all hours or in one specific window are good indicators of what can influence pickup rate. Assuming those other factors stay constant (and this is really important: you need constant variables across your sales team), your first 15 to 30 days will give you a solid grasp of what your pickup rate actually is.
A good rule of thumb: expect it to be higher than anything you were dialing on before. If you were dialing on a software I'm not going to mention and getting 5%, you'll probably get a 10, 15 or 20% pickup rate on Dialer.io.
KPI 2: Pickup to conversation
The next KPI is pickup to conversation. This is dictated by your opener: the rep's tone and their verbiage.
By tone, I mean that instead of sounding like "Hello, Michael. This is Jason from XYZ Company," which makes people hang up the phone, I'd rather they sound like this: "Mike, what's going on? It's just Jason from XYZ Company. How can I help?" Completely different demeanor. You want to sound like you don't hate your life: a little enthusiastic, like you want to get after it. Then people actually want to speak to you.
Verbiage is also really important, because you don't want your reps to use a lot of fluff. Instead of "Hey Mike, I was possibly maybe considering that you could actually help me out, and I was wondering if you were doing this…", you're using a billion words to ask a simple question, which is: how can I help? The fewer words the better, as long as you get your point across.
So: a happy tone, don't sound like you hate your life, don't use unnecessary words that create fluff, and then get the overarching outcome of why they opted in or purchased in the first place. I'm all for building rapport, "How are you doing?" and all that. But there comes a point where it works against you, because your conversations go on for minutes and minutes without any impact. Then you realize this person should have been disqualified in the first place, and you just wasted 20 minutes on this lead talking about how he's from Michigan and you're from Michigan too, and you had a great time. Maybe it matters, but not for the purpose of an outbound sales team.
What you want is the overarching outcome of why they opted in: "Hey, what was it that you saw in the ad that sparked your interest?" "What was it you were looking for help with?" "I noticed you purchased the X, Y and Z bundle. What was it that attracted you and caused you to buy it?" What is the overarching outcome that caused them to take action, opt in or buy? Simple as that.
That's what creates a good opener for the most part. As long as the rep sounds happy, doesn't pile on fluff and filler, and gets a decent read on what the prospect is looking for, you've got a solid opener, my friend. As a target to work towards, I think a minimum of 55% is good, comfortably pushing into the 70s as the team gets more disciplined and trained over time.
KPI 3: Conversation to set
After that, we have the conversation to set KPI. This is dictated by your sales process and your script. You'll hear a lot of different opinions, and I don't really care what you use. You can use any framework, like the Straight Line method. You can use the watermelon method, which is probably the best.
The watermelon method is a made-up sales strategy. In Greece, when the watermelon truck comes by, you ask the guy, "Hey man, which is the best watermelon?" and he picks the heaviest one: "This is the best." He picks the heaviest one because that's the one everyone buys. So you can use whatever you want.
In my opinion, a good script or process identifies what someone is currently doing, what the problem is and the impact that problem is having. If you identify those things, that's a pretty good script. Then, of course, whether they want to make a change now: "If you found something you were looking for, is this something you want to solve now?" "Yes." "Perfect," and you book them in.
The sales script dictates a lot of how many sets you get from your conversations. Also really important is script adherence: are your reps following the script? If they're not, it doesn't matter if you have the best script in the world. Inside the course document, I've included the script from one of the accounts I'm running right now, for their phone setting team specifically, so you can open it and see how it works.
Good news for you: Dialer.io has a script adherence feature, which means you can upload your script and monitor adherence across every rep. The bigger your team, the more script adherence matters. You're far less likely to have a bench full of unicorn setters on a big team than on a single SDR team of two or three. If you look at the graph I created, script adherence becomes significantly more important the more reps you have. So, especially if you're looking to grow an outbound setting team, make sure script adherence is actually there.
Again, 55% is the minimum, and a well-run team with decent leads reaches into the 70s for conversation to set rate. Important disclaimers: if you have restrictions on how many people you can book in, or a heavy filtering system, this number will be lower. And if you're pitching instead of setting, the measure becomes conversations to presentations rather than conversations to sets, but the principle still applies.
Department KPIs: daily, weekly and monthly
Once everything above is set, it's time to set department KPIs for the reps to follow. KPIs live across three timelines, because not everything can be measured in a day and not everything can be measured in a year.
Daily: input-focused activities. What do my reps need to do every day, as inputs, so that the likely by-product is this outcome at the end of the month?
Weekly: QC metrics to gauge team pace. At the end of the week, when I look back at all this data, can I see that we're at a healthy pace to hit our goals? If not, what changes need to be made, if any?
Monthly: the production numbers the department needs to stay viable. This is the sum of your efforts: an evaluation of what happened last month and a decision about what happens next month. It's not an input; it's a reflection, a by-product.
Daily KPIs. Take the total number of sets or presentations the department needs, divide by your number of reps, and divide that by 26, which is the average number of weekdays in a month. That's the number of sets each rep needs to hit daily. The deficit for the week becomes the rep's weekend target. That's how I like to structure it. If you want everyone to work seven days a week, 365 days a year, fine, it's your call, and this wouldn't apply to you. But for the most part, people like to work five days a week. If you have a setting team that also wants to work weekends, I'd set it up as an incentive: if they don't hit their goals during the week, their weekend goal is the deficit. If the target is 5 sets a day and a rep hits 20 sets in a week instead of 25, their weekend target is now 5 sets.
Pair every daily set target with a talk time target. This depends on your market, but a solid general benchmark is roughly 2 to 2.5 hours of talk time for seven sets. It can be more or less; I'm giving you a rough guideline. If my rep talks to people for a total of 2 to 2.5 hours every day, I expect him or her to make about seven sets. I think that's fairly reasonable, at least in the high-ticket info product space. Obviously that depends on other variables, which is why I keep saying "it depends". But that's my general recommendation.
Weekly QC metrics tell you how well the department is pacing. A few worth watching in Dialer.io:
Non-work time: the sum of after-call work, preview and ready time. Aim to keep it under 20% of total time, so reps spend about 80% of their time dialing and talking. There's a graph in the course document that shows what that means.
Conversations over 10 minutes that result in no booking: ideally under 10% of all conversations that pass the 10-minute mark. In other words, you want to book or present to about 90% of those people. The rationale: by the 10-minute mark, enough time has passed for the rep to have decided whether the prospect is qualified.
Conversion and show rate for the closing call.
Monthly KPIs should be your cash collection goal divided by the number of reps, so you see cash collection for each rep, plus your target close rate and show rate, or schedule to close, for simplicity. That's pretty much it. That's how you set KPIs.
Next: a hiring plan
Then you want to set up a hiring plan, because you can have great KPIs, but if you have one sales rep and you need 20, it's not really going to work.