What VoIP is and why it matters
Hey guys, what's up? I'm going to talk about VoIP: what it is and why it's important for you to know about it as someone doing outbound. VoIP is essentially your revenue engine. It stands for Voice over Internet Protocol. Traditionally, people called over the PSTN, the traditional phone network. But these days physical phone systems are so hard to scale that businesses use VoIP, because it's far more controllable and has a lot of benefits.
Essentially, it's how your reps connect to the world, whether through your dialer, your CRM or whatever it is. What it controls is speed to lead, pickup rate, call quality, routing logic (which I'll go into), reporting, compliance and scalability. If your VoIP is bad, you're going to be in trouble, because there's nothing you can do to fix a really poor infrastructure.
Speed to lead
Speed to lead has a lot to do with VoIP. Your VoIP determines how fast the reps can actually get the call: whether your routing works, whether your calls connect correctly, and whether there's a dial delay. I'm going to lump VoIP and dialers together, because the VoIP is the infrastructure and the dialer is what uses it.
There are many VoIP infrastructures. Twilio, for example, is the most common VoIP infrastructure used by most dialers. It's not what we use at Dialer.io. It's a phenomenal, very large infrastructure that's very easy to do development work on. However, it's built more for SMS than for dialing, so when people dial on it, it creates issues. And because it's so easy to develop on, so many dialers use it that it creates congestion, which leads to delays, call deliverability issues, dropped calls and so on. The ones we're on are far clunkier for software development, more expensive to get set up on and more difficult overall.
Number reputation
Pickup rates are not random. There's a guide to pickup rates in this course covering the many things you can do, so I won't go into those here. In this one, I'm talking about things that seem outside your control but are actually inside your control, because you can always switch providers.
First, number reputation. A lot of people think of spam flagging, and I'll get to that in a second. But the reputation of a number is essentially how well your number behaves, and how that behavior is assessed. Every carrier has differences in what it thinks good and bad behavior is, and to be honest, it's not entirely clear what they all want. However, there are some good common rules, and by tracking everything you can figure it out. Essentially, number reputation is whether the number is being used the way a good actor would use it.
Bad actors are scam call centers that multi-line dial, call everybody relentlessly, get hung up on a lot and get complaints. If you use the same tools they use, or do the same things, then even though you're not a scam, you're acting like one: multi-line dialing, heavy power dialing, calling people many times, or having really short call durations because you leave two-second voicemails, which really hurt you. Not getting many calls back is probably an issue too, and so is using the same number for a while and then dropping it because it gets spam flagged, when it was often already spam flagged when you got it. These are all things that go against you, and they make it really difficult to recover.
Carrier registration
Carrier registration is another one. You can go through and register with some carriers, using services like Hiya or First Orion. The infrastructure provider can also do that for you. Most don't, because it's difficult. We do it at Dialer.io, and it's a far more effective way of doing it, because the dialer itself can get whitelisted.
Call attestation
There's an attestation score, which is the underlying score before spam flagging. You'll know you have poor attestation if your calls go straight to voicemail: it's ringing for you, but not ringing for the prospect. If you have extremely low pickup rates, say under 5%, your attestation score is low.
Most dialers have level B attestation; Dialer.io has level A. What that means is that those dialers choose not to send certain pieces of information. That's purely at the infrastructure level, and you can't ask them to send more; it's a contractual arrangement. There are multiple pieces of information carriers want in order to authenticate the call, and we send all of them. Most dialers only send about 60 to 70% of that information, because it's much cheaper.
Spam monitoring
The other one is spam monitoring, which is something you can do. We do it as part of the service, and then we change how the numbers are being used. You never want to stop using numbers just because they're spam flagged.
Compliance
Then there's compliance. There are certain things you must have, and they really help. You need to be able to add someone to the Do Not Call list. If you can't, that's illegal. This is where a lot of AI tools stumble: many of them haven't built the ability to add people to the DNC list. They also must be able to route back to a person.
"Do not call" has to be a very easy button to press, and it has to take the person off every single dial list that exists. They can opt back in later, and that's fine. But you need a process in your business, or in your VoIP system or dialer, where they can hit the Do Not Call button. And do not call is very specific: it's not "I'm not interested", it's "put me on your do not call list". There has to be a button for that, and there has to be opt-out logic. There are also state-by-state time restrictions, which can be put in place at the infrastructure level, but often aren't.
TCPA risk controls. Abandon rate monitoring is a big one. If your dialer doesn't monitor abandon rate, that's a problem, and you need to get off that dialer. If you're multi-line dialing and your abandon rate is more than 3%, you're breaking the law in a significant way. This goes beyond the TCPA into FCC territory, and the fines are enormous. Say you're multi-line dialing five people at once and two people answer: you hang up on one. If that happens more than 3% of the time, that's a no-go. And it's 3% at any time; it's not an average. If it ever hits 3%, there's an issue. The infrastructure company is also required to report you, so you're being reported even if you don't know it.
Consent tracking is another one. You have to have the correct opt-ins. And if you're calling opt-ins, you'll have a higher pickup rate and a better result overall.
Signs your VoIP isn't helping you
Lots of dropped calls, or random disconnects.
Lag in the audio.
Echo. An echo can also be a "you" thing, like a speaker next to your microphone creating a loop. But if there's an echo on all of your calls, that can be a VoIP issue.
Glitches or low volume.
The dialer crashing, lots of disconnects, or issues during peak dialing times. It can also be an internet issue, but if the VoIP is getting overloaded because it's 6 p.m., that's an issue.
What to look for in a dialer or VoIP system
Number health monitoring.
Spam flag prevention, or at least mitigation.
Compliance support. You don't want a provider pushing non-compliant dialing practices like multi-line dialing. You can do those things, but the use cases are quite specific.
Actionable reporting, not just reporting that makes the dialer look better. You want to see the actual pickups. If you can get SIP trunking error reports, that's really handy, but they're hard to get. We use them at Dialer.io, because then you can see true call deliverability. Around 98.9% of all calls on Dialer.io are actually delivered to the lead. Whether they pick up is up to them, but the call is delivered and ringing for them. If you're below about 97 to 98%, that can be a real issue. Most dialers won't give you this, although you can always request it.
Built for high-volume outbound. High-volume outbound is a very specific type of dialing. It's not B2B; it's just high volume. Most dialers aren't really set up for it.
Watch out if you have low pickup rates and get none of this information: no remediation, no clear spam flagging, no compliance measures, and limited reporting where you can't see the times of day and days of the week your dials get picked up most. Some providers make it hard to figure out what a pickup is, when it's really not that hard: it's a human being answering the phone, and there's automatic voicemail detection. Usually the reason they don't show you is that their system isn't good. You want that level of transparency. If you have all that, and you're optimizing for time of day and for speed to lead, you'll get a good response.