Speed to Lead: How Fast Should You Call a New Lead?

Speed to Lead: How Fast Should You Call a New Lead?

Speed to Lead: How Fast Should You Call a New Lead?

Call new leads within five minutes. What the research says about speed to lead, why most teams are slow, and how to route leads so the first call is fast.

M

Matt Ryder

·

WHAT YOU’LL LEARN

  • Call every new lead within five minutes of the form fill.

  • Most teams are slow because new leads wait in the CRM and no one owns the queue.

  • Route new leads to the next available rep, ahead of follow-ups.

Summarize with AI

Call a new lead within five minutes of the form fill. The research is consistent: leads go cold fast, and every minute you wait lowers the odds that you'll reach the person at all. Speed to lead is the cheapest pickup-rate improvement there is. You've already paid for the lead, and calling sooner costs nothing extra.

What the research says

  • Within an hour vs later: in research published by Harvard Business Review, firms that tried to contact a lead within an hour were nearly 7 times as likely to qualify it as those that waited even an hour longer. They were also more than 60 times as likely to qualify it as those that waited 24 hours or more (HBR, The Short Life of Online Sales Leads).

  • Most companies are slow: the same research audited 2,241 US companies. Only 37% responded within an hour, 24% took more than a day, and 23% never responded.

  • Five minutes vs thirty: the earlier MIT and InsideSales study found the odds of reaching a lead were 100 times higher when the call came within five minutes rather than 30.

The studies are more than a decade old, and the pattern still holds on our platform. On Dialer.io, new leads called straight after opt-in pick up at 12–15%, against about 10% once older leads are mixed in.

Why teams are slow

  • Leads land in the CRM and wait for someone to notice them.

  • Reps cherry-pick: they work the leads they like, not the newest.

  • No one owns the queue after hours or at lunch.

  • Round-robin to busy reps: the lead is assigned to someone already on a call.

  • Too few setters for the volume. As a rule of thumb, plan one setter per 50 or so new leads a day.

How to get under five minutes

  1. Route new leads straight into the dialer queue, ahead of follow-ups, the moment they're created in your CRM.

  2. Send them to the next available rep, not to a named owner who might be busy.

  3. Managers set the order, not reps. New leads first, then scheduled call-backs, then follow-up attempts.

  4. Staff for your peaks. Look at when leads arrive by hour and day, and schedule setters to match.

  5. Measure it. Track minutes from form fill to first dial, per rep and per lead source.

  6. Keep calling after the first attempt. Speed gets you the first chance. A cadence gets you the rest. See How many times should you call a lead?

What a fast first call sounds like

The lead has just filled in your form, so make the context obvious: "Hi Jordan, it's Sam from Acme. You just asked about a quote for your roof, so I wanted to catch you while it's fresh." It also helps get the call through iPhone call screening, because the reason is clear.

FAQs

What is speed to lead?

The time between a lead submitting their details and your first attempt to contact them.

What's a good lead response time?

Under five minutes during working hours. Anything over an hour costs you a large share of conversations.

Should we text first or call first?

Call first while the lead is warm. If there's no answer, follow with a short text from a separate texting number, where you have consent.

What about leads that come in after hours?

Queue them for the first call of the morning, ahead of everything else, and call within your permitted calling hours.

How Dialer.io helps

Dialer.io queues new CRM leads for an immediate first call and routes them to the next free rep. Managers decide the calling order, so new leads always go first. Book a walkthrough.

"One of the other things that was a game changer was the speed to lead function." — Andy Anderson, co-founder of Relentless Education

About the author: Matt Ryder is the founder of Dialer.io. He has built and run outbound sales floors in several industries, and Dialer.io’s platform has handled tens of millions of outbound dials.

WHAT YOU’LL LEARN

  • Call every new lead within five minutes of the form fill.

  • Most teams are slow because new leads wait in the CRM and no one owns the queue.

  • Route new leads to the next available rep, ahead of follow-ups.

Summarize with AI

See it in action.

Dialer.io gets every lead worked, automatically.

SHARE

Put this into

practice.

See how Dialer.io gets every lead worked, without adding headcount.

Call a new lead within five minutes of the form fill. The research is consistent: leads go cold fast, and every minute you wait lowers the odds that you'll reach the person at all. Speed to lead is the cheapest pickup-rate improvement there is. You've already paid for the lead, and calling sooner costs nothing extra.

What the research says

  • Within an hour vs later: in research published by Harvard Business Review, firms that tried to contact a lead within an hour were nearly 7 times as likely to qualify it as those that waited even an hour longer. They were also more than 60 times as likely to qualify it as those that waited 24 hours or more (HBR, The Short Life of Online Sales Leads).

  • Most companies are slow: the same research audited 2,241 US companies. Only 37% responded within an hour, 24% took more than a day, and 23% never responded.

  • Five minutes vs thirty: the earlier MIT and InsideSales study found the odds of reaching a lead were 100 times higher when the call came within five minutes rather than 30.

The studies are more than a decade old, and the pattern still holds on our platform. On Dialer.io, new leads called straight after opt-in pick up at 12–15%, against about 10% once older leads are mixed in.

Why teams are slow

  • Leads land in the CRM and wait for someone to notice them.

  • Reps cherry-pick: they work the leads they like, not the newest.

  • No one owns the queue after hours or at lunch.

  • Round-robin to busy reps: the lead is assigned to someone already on a call.

  • Too few setters for the volume. As a rule of thumb, plan one setter per 50 or so new leads a day.

How to get under five minutes

  1. Route new leads straight into the dialer queue, ahead of follow-ups, the moment they're created in your CRM.

  2. Send them to the next available rep, not to a named owner who might be busy.

  3. Managers set the order, not reps. New leads first, then scheduled call-backs, then follow-up attempts.

  4. Staff for your peaks. Look at when leads arrive by hour and day, and schedule setters to match.

  5. Measure it. Track minutes from form fill to first dial, per rep and per lead source.

  6. Keep calling after the first attempt. Speed gets you the first chance. A cadence gets you the rest. See How many times should you call a lead?

What a fast first call sounds like

The lead has just filled in your form, so make the context obvious: "Hi Jordan, it's Sam from Acme. You just asked about a quote for your roof, so I wanted to catch you while it's fresh." It also helps get the call through iPhone call screening, because the reason is clear.

FAQs

What is speed to lead?

The time between a lead submitting their details and your first attempt to contact them.

What's a good lead response time?

Under five minutes during working hours. Anything over an hour costs you a large share of conversations.

Should we text first or call first?

Call first while the lead is warm. If there's no answer, follow with a short text from a separate texting number, where you have consent.

What about leads that come in after hours?

Queue them for the first call of the morning, ahead of everything else, and call within your permitted calling hours.

How Dialer.io helps

Dialer.io queues new CRM leads for an immediate first call and routes them to the next free rep. Managers decide the calling order, so new leads always go first. Book a walkthrough.

"One of the other things that was a game changer was the speed to lead function." — Andy Anderson, co-founder of Relentless Education

About the author: Matt Ryder is the founder of Dialer.io. He has built and run outbound sales floors in several industries, and Dialer.io’s platform has handled tens of millions of outbound dials.

See it in action.

Dialer.io gets every lead worked, automatically.

SHARE

Put this into

practice.

See how Dialer.io gets every lead worked, without adding headcount.